Mounts
FlyPod 3X-AP $1,500+/- depending on options chosen
by Photohigher
(For Medium to larger Heli's)
Description:
3XAInnovative simple 3 axes camera mounts with standard skids without retractable landing gear. The camera mount
is similar to the Fly Pod 2X-AP mount except additionally it has a third axes on the Gymble. All three axes can be
adjusted to suit the camera being used and can be fine tuned to balance the camera and allow all the axes to pass
through the nodal point of the camera.
Electronic and mechanical gyros can be fitted to the camera mount for added stability depending on what is
required. The mount is part of the unique Fly Pod modular system allowing the camera mount to be upgraded at a
later stage. Part of the modular system allows the camera mount to be easily configured for the end use and
customer requirements so we can supply the camera mount with custom parts for example we can supply longer CF
tube or we can supply smaller versions of the mount depending on your requirements.
The camera mount is supplied with 3 digital servos and 2mm pitch timing gears and belts all the CF tube and Glass
reinforced plastic parts required to build the Fly Pod 3X-Ap camera mount.
Specifications:
Weight: 1.46Kg = 3.2 Pounds;
Gear Ratio: 5:1 gear ratio on all axes allowing smooth and precise control and we use GT2mm Timing gears and
belts;
Servos: HS 5645MG with Photo Higher unique output gear;
Functions: - Pan, Tilt and Roll axes with absolute positioning digital servos all capable of either 180 degrees or 360
degrees of rotation. Quality high torque and high speed servos are used with metal gears and dual precision ball
bearings. All axes are capable of gyros stabilization using either Futaba gyros or the Spartan RC camera Mount
stabilization.
A second hydraulic roll axes is also supplied which is required when using Mechanical gyros like the Kenyon KS2.
Additionally all the CF tube and glass reinforced plastic parts
by Photohigher
(For Medium to larger Heli's)
Description:
3XAInnovative simple 3 axes camera mounts with standard skids without retractable landing gear. The camera mount
is similar to the Fly Pod 2X-AP mount except additionally it has a third axes on the Gymble. All three axes can be
adjusted to suit the camera being used and can be fine tuned to balance the camera and allow all the axes to pass
through the nodal point of the camera.
Electronic and mechanical gyros can be fitted to the camera mount for added stability depending on what is
required. The mount is part of the unique Fly Pod modular system allowing the camera mount to be upgraded at a
later stage. Part of the modular system allows the camera mount to be easily configured for the end use and
customer requirements so we can supply the camera mount with custom parts for example we can supply longer CF
tube or we can supply smaller versions of the mount depending on your requirements.
The camera mount is supplied with 3 digital servos and 2mm pitch timing gears and belts all the CF tube and Glass
reinforced plastic parts required to build the Fly Pod 3X-Ap camera mount.
Specifications:
Weight: 1.46Kg = 3.2 Pounds;
Gear Ratio: 5:1 gear ratio on all axes allowing smooth and precise control and we use GT2mm Timing gears and
belts;
Servos: HS 5645MG with Photo Higher unique output gear;
Functions: - Pan, Tilt and Roll axes with absolute positioning digital servos all capable of either 180 degrees or 360
degrees of rotation. Quality high torque and high speed servos are used with metal gears and dual precision ball
bearings. All axes are capable of gyros stabilization using either Futaba gyros or the Spartan RC camera Mount
stabilization.
A second hydraulic roll axes is also supplied which is required when using Mechanical gyros like the Kenyon KS2.
Additionally all the CF tube and glass reinforced plastic parts
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Actual video filmed using the FlyPod
ASI Camera mount $995
ASI Revolutionary self contained 2 or 3
axis camera
mount with break through vibration
isolation and automated horizontal leveling
system.
It's finally possible to take your stock
Mongoose, Evolution, Vario Benzin Trainer
or existing 90 size Helicopter and use this
camera mount for photo and videography.
Mounts to the helicopter with only six
screws and in less than a hour you will be
flying your camera for the perfect shot.
The robust design also allows for safe
autorotation landings.
Camera Mount Video (Right)
ASI Revolutionary self contained 2 or 3
axis camera
mount with break through vibration
isolation and automated horizontal leveling
system.
It's finally possible to take your stock
Mongoose, Evolution, Vario Benzin Trainer
or existing 90 size Helicopter and use this
camera mount for photo and videography.
Mounts to the helicopter with only six
screws and in less than a hour you will be
flying your camera for the perfect shot.
The robust design also allows for safe
autorotation landings.
Camera Mount Video (Right)